View MN15G0804_285795.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

MN15G0804
Type ROM (x8-bit) x RAM (x 4-bit) x Package Number of Instructions Minimum Instruction Execution Time Interrupts Timer Counter
MN15G0804 8K 512 QFP044-P-1010E *Lead-free 103 0.96 ms at 1/4 frequency dividing (at 2.4 V to 5.5 V, 32 kHz) 1.91 ms at 1/8 frequency dividing (at 2.0 V to 5.5 V, 32 kHz)* * The lower limit for operation guarantee for EPROM built-in type is 2.3 V. VRST when using auto reset. * RESET * IRQ1 * IRQ2 * IRQ3 Timer counter 0 : 8-bit x 1 (event count, pulse output) Clock source ********************* 1/2 of system clock frequency; RMO; TCO2; TCI input Timer counter 1 : 8-bit x 1 (event count, pulse output) Clock source ********************* 1/2 of system clock frequency; fout1; TCO0; fXI Possible 16-bit cascade connection with timer counter 0 Timer counter 2 : 8-bit x 1 (event count, pulse output) Clock source ********************* 1/2 of system clock frequency; RMO; fXI; TCI input Time base timer Watchdog timer
I/O Pins LCD
I/O
34
* Common use : 34 * Specified pull-up resistor available : 34 (software programmable) * Specified output architecture available : Nch open drain / push-pull : 34 (software programmable)
30 segments x 4 commons (1/2 , 1/3 , 1/4 duty) Duty and period are variable. Auto reset circuit selectable (mask option)
Remote Control Output Notes
124
MAC00003BEM
MN15G0804
Electrical Characteristics
Supply current
Limit Parameter Symbol IDD1
Operating supply current Supply current at HALT Supply current at STOP
Condition min fXI = 32.768 kHz (1/8 dividing) when using multiply circuit fXI = 32.768 kHz (1/8 dividing) fXI = 32.768 kHz (1/8 dividing) fXI = 32.768 kHz fXI = Stop typ 3.0 10 3 2.0 1.0 3.0 max 5.0 40 15 5.0 3.5 6.0
Unit mA A mA A A A
IDD2 IDD3 IDD6 IDD7
Auto reset power cunsumption
IDD9
(Ta = -10C to +60C, VDD = 3.0 V, VSS = 0 V)
P00/key0 P01/NSYNC/key1 P02/TCO/key2 P03/NTC1/key3 P10/key4 P11/key5 P12/key6 P13/key7 NIRQ/P20 RMO/P30 NRST
PA0/SEG21 P93/SEG20 P92/SEG19 P91/SEG18 P90/SEG17 P83/SEG16 P82/SEG15 P81/SEG14 P80/SEG13 P73/SEG12 P72/SEG11 34 35 36 37 38 39 40 41 42 43 44
Pin Assignment
33 32 31 30 29 28 27 26 25 24 23
MN15G0804
Support Tool
In-circuit Emulator EPROM Built-in Type
PX-ICE1500 + PX-PRB15G1604-QFP044-P-1010E Type ROM (x 8-bit) RAM (x 4-bit) Minimum instruction execution time MN15GP1604 16 K 512 0.96 s at 1/4 frequency dividing (at 2.4 V to 5.5 V, 32 kHz) 1.91 s at 1/8 frequency dividing (at 2.3 V to 5.5 V, 32 kHz) Package QFP044-P-1010E *Lead-free
P71/SEG10 P70/SEG9 P63/SEG8 P62/SEG7 P61/SEG6 P60/SEG5 P53/SEG4 P52/SEG3 P51/SEG2 P50/SEG1 COM3/SEG0
1 2 3 4 5 6 7 8 9 10 11
22 21 20 19 18 17 16 15 14 13 12
VLC1/P40 VLC2/P41 VLC3/P42 OUTC VSS XO XI VDD COM0 COM1 COM2
QFP044-P-1010E
*Lead-free
MAC00003BEM
2
Request for your special attention and precautions in using the technical information and semiconductors described in this material
(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuits examples of the products. It neither warrants non-infringement of intellectual property right or any other rights owned by our company or a third party, nor grants any license. (3) We are not liable for the infringement of rights owned by a third party arising out of the use of the product or technologies as described in this material. (4) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: * Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. * Any applications other than the standard applications intended. (5) The products and product specifications described in this material are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (6) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage, and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (7) When using products for which damp-proof packing is required, observe the conditions (including shelf life and amount of time let standing of unsealed items) agreed upon when specification sheets are individually exchanged. (8) This material may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita Electric Industrial Co., Ltd.
2002 JUL

▲Up To Search▲

Price & Availability of MN15G0804

	To Download MN15G0804 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .